Skip to product information
1 of 5

ŞAHİNLER OTO MARKET

Renault Megane 4 Hb&SD 2016 and Newer Chrome Fender Indicator Trim 2 Pieces

Renault Megane 4 Hb&SD 2016 and Newer Chrome Fender Indicator Trim 2 Pieces

Regular price 497.39 TL
Regular price 0.00 TL Sale price 497.39 TL
Sale Sold out
Taxes included.
Quantity
Trendyol Mağazamızdan Satın Al

Renault Megane 4 Hb&SD Post-2016 Chrome Fender Signal Trim 2 Pieces

 

The product package consists of 2 pieces.

Product Features:
Chrome products are produced with a special mold system for the area where they will be applied on the vehicle.
Chrome products are made of A-class A 304 quality stainless steel.
The products are sent ready for installation with high-quality double-sided acrylic tape on the back. 

 

Installation Instructions:
Install in a dry and dust-free environment.
After removing the product from its packaging, perform an installation trial on the area where it will be applied, without removing the protective surface of the double-sided tape on it.
Clean the surface to be glued thoroughly with a cleaning liquid (alcohol, rubbing alcohol, cellulosic thinner, etc.). (Do not clean with liquids containing additives such as perfumed cologne, wet wipes, gasoline, etc.) The cleanliness of the surface is very important for installation. Plastic parts with oily and shiny surfaces, such as window seals and door protection strips, must be cleaned until this surface disappears.
If the product contains an adhesive enhancer 'Primer' wipe (Primer: It is a chemical liquid to be applied to plastic surfaces. It is not/should not be used on painted surfaces of the vehicle), apply it only to the area where the tapes on the back of the product will stick and the product will cover. (Be careful not to apply it to parts where the product will not stick/cover)
For the double-sided tape on the back of the product to show its full properties, the ambient temperature should be above 25°C. After removing the protective surface of the tape, apply heat to the tape with a hairdryer or similar to increase the adhesion force.
After removing the protective surface of the tape on the back of the product and applying heat, apply the product to the cleaned and, if necessary, primed area in one go. Press firmly with a dry cloth to ensure it adheres well. To ensure the product adheres firmly, protect it from water for 24 hours and avoid washing your car with pressurized water for 48 hours.

 

 

FREE SHIPPING

View full details